Datoptic RM12-S6.TB - Rackmount Manual de usuario descargar pdf (Pagina 5)

ARCHTTP PROXY SERVER INSTALLATION

114

When you open the SNMP traps conguration page, you will see the

following settings:

(1). SNMP Trap Congurations

Enter the SNMP trap IP address.

(2). SNMP System Congurations

Community name acts as a password to screen accesses to the

SNMP agent of a particular network device. Type the community

names of the SNMP agent in this eld. Before access is granted to

a request station, this station must incorporate a valid community

name into its request; otherwise, the SNMP agent will deny access

to the system. Most network devices use “public” as default of their

community names. This value is case-sensitive.

(3). SNMP Trap Notication Congurations

Before the client side SNMP manager application accepts the 6Gb/

s SATA RAID controller traps, it is necessary to integrate the MIB

into the management application’s database of events and status

indicator codes. This process is known as compiling the MIB into

the application. This process is highly vendor-specic and should be

well-covered in the User’s Guide of your SNMP application. Ensure

the compilation process successfully integrates the contents of the

areca_SATA.mib le into the traps database. Please refer to Appen-

dix C of

“

SNMP Operation & Installation”. The MIBs le resides at:

<CD-ROM>\packages\SNMP_MIBs on the software CD.

Note:

Event Notication Table refer to Appendix D.

After you conrm and submit congurations, you can use

"Generate Test Event" feature to make sure these settings are

correct.

• Rescan Device Conguration:

Let's assume you've put all Areca RAID adapters to a system.

The Archttp scans the RAID adapters on the system and create

an individual adapter icon located on left column of the Archttp

Congurations screen. This adapter icon is for user to launch web

browser RAID manager. If there is any RAID adapter missed on the

system start-up, you can use the "Rescan Device" function. The

1 2 3 4 5 6 7 8 9 10 ... 89 90

Sin comentarios

Datoptic RM12-S6.TB - Rackmount Manual de usuario Pagina 5